Entergy Electrician 1/C, 2/C, or 3/C - Nuclear in St. Francisville, Louisiana

Electrician 1/C, 2/C, or 3/C - Nuclear

Apply now »

Date: Jan 7, 2019

Location: St. Francisville, LA, US

Company: Entergy


Under directive supervision, with limited latitude for planning or laying out of working details, must be able to perform

complex electrical work involved in the inspection, repair and installation of electrical equipment in nuclear generating

stations and electrical substations and be qualified to do the following and related work as assigned:

  1. Install and maintain all classes of electric circuits in conduit or open wiring, lighting fixtures, motors, controls and other electrical auxiliaries.

  2. Clean and inspect motors including check of clearance and insulation resistance and change of oil as required.

  3. Test electrical circuits and equipment for insulation resistance.

  4. Inspect and make necessary repairs, adjustments, etc. to oil circuit breakers, transformers, rotating electrical machinery, controls, miscellaneous switching equipment.

  5. Diagnose and correct faults in electrical apparatus, such as generators, motors, control and protective equipment, transformers, storage batteries and other electrical auxiliaries.

  6. Perform work on energized circuits.

  7. Set up rigging for the installation and maintenance of electrical equipment, foundations, supports, etc.

  8. Lay out work from prints or verbal instructions.

  9. Direct work of assistants and assist other electricians.

  10. Assist in general operation and maintenance during unusual or emergency periods.

  11. Prepare maintenance and other routine reports.

  12. Perform necessary housekeeping as per applicable Nuclear Regulatory Commission endorsed regulations and standards.

  13. Comply with established procedures and with rules of Code of Federal Regulations, Nuclear Regulatory Commission regulatory guides, National Standards and other regulatory agencies.

  14. Test current and potential transformers for ratio and phase angle errors.

  15. Make thorough and complete investigations of malfunctions of relays, control devices, carrier current, supervisory, telemeter equipment, etc., and turn in complete written reports.

  16. Test, repair, adjust and calibrate all types of protective, control, and auxiliary relays.

  17. Test, repair, adjust and calibrate all types of carrier current equipment.

  18. Test, repair, adjust and calibrate all types of supervisory control equipment.


  1. Must have worked at least two years in electrical work.

  2. Must have at least two years' experience in electrical or related work.

  3. Have a thorough knowledge of electrical work, such as conduit and wiring installation, motor and starter maintenance, wiring diagram and connections, etc.

  4. Be familiar with the advanced principles of electricity, magnetism and electric circuits.

  5. Be familiar with the strength and use of ropes, chains, cables, etc., as used in rigging.

  6. Be proficient in the use of and nomenclature of tools and equipment ordinarily used.

  7. Be thoroughly familiar with the operation, construction, and function of rotating electrical equipment, switches, transformers, instruments, control and accessory equipment, etc.

  8. Be able to compute bills of material for jobs, working from specifications or from oral instructions.

  9. Be thoroughly familiar with Company's electrical and mechanical tagging rules.

  10. Have ability to understand and perform semi‑routine operations of high complexity and considerable variety where standard methods of procedure are available.

  11. Know Company's safety rules, and be able to administer all approved methods of resuscitation, and be able to render practical first aid.

  12. Know the locations of, and be able to operate, all of the firefighting equipment available. Know what kind of equipment to use on electrical, oil and other fires.

  13. Be able to write and review work procedures.

  14. Perform all types of insulation tests.

  15. Be able to read and understand all wiring diagrams and blueprints in connection with the installation, testing, adjusting and maintenance of meters, switchboard equipment, relays, controls, and related equipment.


  1. Be particularly alert in observing hazards and avoiding accidents.

  2. Be willing to attend and take part in safety meetings.

  3. Be willing to work under unusual surroundings, as well as the normal working conditions pertaining to this job.

  4. Be willing to work irregular or extra hours as required.

  5. Be able to receive and transmit orders and instructions in such a manner as to inspire respect and confidence of both superiors and subordinates.

  6. Must have a temperament suited to jobs where manual dexterity, precision and patience are particularly essential.

  7. Be capable of assuming supervisory responsibilities.

  8. Be especially neat, clean and orderly in work and person.

  9. Understand importance of always rendering and maintaining first class, courteous service to all customers.


Successful completion of the EEI MASS test.

**Candidates selected to take the MASS Test will be invited via e-mail. You may need to check your spam email.

*If you are MASS Recommended, please note it on your resume.

Please note: Authorization to work in the United States is a precondition to employment in this position. Entergy will not sponsor candidates for work visas for this position.


Primary Location: Louisiana-St. Francisville

Job Function :Nuclear

FLSA Status :Nonexempt

Relocation Option: No Relocation Offered

Union description/code :RIVER BEND BARG. - NUCLEAR-R02

Number of Openings :1

Req ID: 84917

Travel Percentage :Up to 25%

An Equal Opportunity Employer, Minority/Female/Disability/Vets. Please click here to view the full statement.

One way that Entergy has found to identify and assess the abilities and skills needed for certain jobs is through pre-employment testing. If this position does require an EEI test, the type of test will be located under the qualifications section of the job posting. If you are invited to a test session, we strongly recommend you review and complete the practice test as well as review the testing brochure for your respective test. The test brochure will give you critical information on the test such as time allocated and Pre-employment Testing: numberof questions. Also, keep in mind that the actual test is timed; you should practice timing yourself while doing the practice tests. The practice test information and test brochures can be located by going to the EEI website, http://www.eei.org/practicetests ,LogonID: entergy, password: practice test (2 words).

In addition to EEItestingthere is also Fit-for-Duty testing which will identify and assess the abilities and skills needed for certain jobs. If this position does require Fit-for-Duty testing, the type of test will be located under the qualifications section of the job posting.


As a provider of essential services, Entergy expects its employees to be available to work additional hours, to work in alternate locations, and/or to perform additional duties in connection with storms, outages, emergencies, or other situations as deemed necessary by the company. Exempt employees may not be paid overtime associated with such duties.

Nearest Major Market: Baton Rouge

Job Segment: Law, Nuclear, Electrical, Electrician, Inspector, Legal, Energy, Engineering, Quality

Apply now »